A10 Headset + Xbox Series X | S Setup Guide – ASTRO Gaming Blog

This guide provides all the information you need to set up your A10 headset on your Xbox Series X or S.

Remove the following from the box:

  • A10 headset
  • A10 volume control cable


Step by step

step 1: Make sure your Xbox Series X | S system is turned on.

Step 2: Securely connect the A10 volume cable to the A10 headset until the 3.5mm connector disappears. The end closest to the volume wheel should be connected to the headset.

Step 3: Connect the other end of the cable to your Xbox controller.

Step 4: Press the Xbox button on your controller to open the Xbox menu and[設定]Go to the menu.

Step 5: Go to the volume and audio output settings menu.

Step 6: [音量オプション]so,[パーティチャットの出力]To[ヘッドセット]Set to.

Step 6: [ヘッドセットオーディオ]so,[ヘッドセット形式]But[WindowsSonic]Make sure it is set to.

If you purchased a Dolby Atmos license, select it instead and use the Dolby Access app to customize additional equalizers and audio settings. Learn more about Dolby Atmos and the Xbox Series X | S Audio.

Step 7: Close the menu and start your favorite game.

Step 8: I’m glad I went! Be sure to check for in-game options for potential player mute and other audio settings, as these features can vary from game to game.

If you need further assistance, please contact our customer service team. Thank you for being part of the ASTRO family!

A10 Headset + Xbox Series X|S Setup Guide

Back to top button